Hebei Fangyuan Instrument & Equipment Co., Ltd.  

Product Name: UV-LED Ultraviolet Radiation Polyolefin Crosslinking Machine Model NO.: UV-LED Driven Type: Electric Installation: Vertical Automatic Grade: Automatic Warranty: 12 Months Certification: CCC, ISO, CE Condition: New Demoulding: Automatic Function: High Temperature Resistance, Energy Saving and High Efficiency Power: 20kw Effective Irradiation Length: 1m Trademark: Fangyuan Transport Package: Wooden Case Specification: 1660(L)x960(W)x1730(H) Origin: Hebei, China Product Description UV-LED Ultraviolet Radiation Polyolefin Crosslinking MachineProduct DescriptionThe new LED ultraviolet radiation polyolefin cross-linking equipment adopts the new technology. The power consumption of the LED lamp is 70% lower than that of the old radiation, and the cross-linking speed is more than twice of the original. The new product solves the shortcomings of the insulating thick radiation. And the shortcomings of slow speed, less land occupation, more reasonable design, eliminating the steam cross-linking process, greatly improving production efficiency. Significant cost and time savings based on customer response. The process of UV-radiation cable cross-linking equipment uses ultraviolet light as a radiation source, and the mixed photo-crosslinked polyolefin compound is extrusion-molded on the conductive core, and then immediately enters into a special irradiation equipment. The molten state is crosslinked by light. The light-crosslinked polyolefin insulated wire and cable products can be obtained by the light-radiated cross-linked insulated core after cooling treatment at different temperatures and other subsequent processing. The UV-radiation cable cross-linking equipment only needs to be slightly modified in the original ordinary extrusion production line, and the upper traction, radiation box, electric control cabinet, etc., which occupy a small area, can meet the requirements of use and produce ultraviolet light radiation. Photo of cross-linked polyethylene wire and cable products.CharacteristicsUltraviolet LED device is the most advanced ultraviolet radiation source in the world, with high energy efficiency (about 30%), extremely high effective wavelength selectivity (half-power wavelength bandwidth 5nm), extremely high service life (30,000 hours), infrared Low heat generation, no ozone generation, more suitable for cross-linking curing of cross-linked polyolefin and other materials.The UV LED source uses a patented lens structure to illuminate the surface of the cable more evenly and uniformly. The substrate design is carried out by the combination of Fluent software simulation fluid and LED junction temperature test, and the LED circuit board is designed by the combination of aluminum nitride ceramic and copper base with better heat dissipation performance, and has a more efficient heat dissipation system.The UV LED source uses a distributed network power source to drive the UV LED. The driving power supply is packaged in a vacuum potting process to ensure the reliability of the power supply. At the same time, the shape of the driving power supply adopts a narrow and long layout, and the long-type LED light source adopts a back-to-back installation mode for the LED circuit to minimize the length of the wire. Realize the light source's on, off, and dimming functions.Technical Parameter1.Power: three-phase five-wire system (380V + N + ground)2.Total installed machine power: 20kW3.The best diameter of the irradiation area: 30mm4.Effective irradiation length: 1m5.The lamp beads use the world's top imported light source, the lens uses imported quartz, so that it has lower energy loss, the lamp set uses liquid cooling technology, so that the LED light source has a longer service life.6.The power supply adopts waterproof power supply, which is protected by vacuum potting technology, with overload, short circuit, over current, over voltage and over temperature protection.7.Optical power output can be arbitrarily adjusted from 10% -100%, according to customer needs to adjust any power.8.Light source life: 30,000 hours (provided by the manufacturer) The output light intensity is attenuated to 70% (efficiency drops to 70%). The usage time is 30,000 hours, and the calculation time is 6~10 years.9.Irradiation box size(mm): 1660(L) x 960(W) x 1730(H)CertificationsOur CompanyFounded in 2001, Hebei Fangyuan Instrument & Equipment Co. Ltd. Is a high-tech enterprises which specialized in testing equipments research, produce, sale and service.Our products involved industries about wire and cable, plastic package, fireproof door, paper product package and foods.We have 17 years' designed and developed experience,over 20 aftersales service employees.